- This topic has 3 replies, 3 voices, and was last updated April 7, 2020 at 7:59 am by Anonymous.
Viewing 3 reply threads
Viewing 3 reply threads
- You must be logged in to reply to this topic.
here is photo of the Black Horse Hurricane I inherited from Sonny after todays maiden flight following the rebuild.
Black Horse Hurricane 1500mm wingspan, 2850gms all up take off weight. 37.8dm 2 WL 75.5gms/dm2 power req 785 to 940w Turnigy SK3 4240 740kv motor rated at 870w 50amp max. Hobbywing Skywalker 80mp esc with 5amp BEC Turnigy 3000mah 5s 30c lipo(430gms) 30gms nose weight and 25gm spinner nut, 12x8jxf 20v 1/2t 16amp 330w, 2/3t 27a 550w, 3/4t 36a 690w, FF 51a 960w. Throttle curve 0,25,50,74, 82%max. rudder, aileron and flap servosTurnigy TSS-11MGA 11g 2.2-2.5kgf digital MG ball bearing servo. Elevator servo Macgregor MG1703 DS 17g 3 to 3.3kgf metal gear servo. Maiden flight time 4.5 mins 55% left on lipo.
Very nice paul,dam,i knew i should of rebuilt the chuffing thing ,lol
For a minute here I thought you had done a maiden today Paul !!!
You should know me better than that 247 but the way things are going I am gong to need a bigger house when all this is over as I am going to run out of space to store all the models I will have built by then!!!!